Materials for painting a dresser
- Cleaner – I used Krud Kutter PrePaint Cleaner
- Rag or paper towels
- Painter’s tape (if needed)
- Wood filler
- 220 grit sandpaper
- Primer – I love Zinsser Oil-based Primer
- Paintbrushes – (it is easiest if you have two-three different paintbrushes, one each for the primer, paint, and sealer)
- Foam roller and paint tray
- Paint – I used the Dixie Belle paint colors French Linen and Cotton. Any furniture paint will work including chalk paint and latex paint.
- Sealer – I used General Finishes High Performance Top Coat in Satin
- Blue sponge for applying sealer (optional)
How to paint a dresser
Preparing the dresserThe most important part of any furniture painting project is the prep. Start by removing the hardware and setting it aside. There may be some hardware that isn’t removable – keyholes, decorating pieces, or stubborn drawer pulls. You can carefully cover any hardware that can’t be removed with painter’s tape. Give your dresser a really good cleaning. As tempting as it may be, don’t skip this step. Any dust, grease, or residue on your dresser will prevent the paint from adhering. I like to use Krud Kutter PrePaint Cleaner for cleaning. It’s quick, thorough, and doesn’t have to be rinsed off. I’ve also used a simple mixture of water and dawn dish soap in the past and that also works well. Once everything is cleaned, do a quick assessment of your dresser. Are there broken parts that need to be repaired? Peeling veneer that needs to be removed? If so, make any necessary repairs. This is a good time to decide what type of hardware you want to use on your dresser once it is painted. You don’t have to choose the exact hardware yet, but you need to know if you will be able to reuse the holes from the original hardware. If you will not be reusing the old holes, fill them with wood filler. At the same time, you can also fill any deep scratches and dents with wood filler. I chose to reuse the hardware for my dresser so I didn’t need to fill the holes. There were, however, circular scratches around each of my drawer pulls, likely from hardware that was used at some point in the past, that needed to be filled. Once the wood filler has fully dried, sand it smooth with 220 grit sandpaper. At the same time, you can sand any rough spots. You may need to do a second round of wood filler to get a completely smooth surface. Then use a clean rag to wipe away the dust from sanding.
I definitely should have used a dropcloth for this part!
Priming the DresserOnce your dresser is prepped for paint, the next step is primer. But wait, why are we using primer? You don’t need to use primer when you use chalk paint! Well, that is true – sort of. You do not need a primer to make chalk paint stick to your furniture. However, primer also does another important job when painting furniture: it helps seal in the wood tannins that love to ruin a beautiful paint job. Have you ever painted a piece of furniture a beautiful, bright white only to have it start yellowing? The majority of the time, this is caused by wood tannins. Even if the yellowing doesn’t show up until the very last coat of paint, it’s still likely caused by wood tannins. To prevent this, you need to seal in the wood tannins before you start painting. A water-based primer will not work for this. There are a couple of products that do work, but by far my favorite is a good oil-based primer. I use Zinsser Cover Stain oil-based primer all the time and it has never failed me. And yes, you can use any paint over an oil-based primer including latex paint or chalk paint. (Have more primer questions? Primer can be confusing but it is so important for a great paint finish, so I wrote a guide answering all of the common primer questions.) I find it easiest to remove the drawers before priming and painting. Use a paintbrush to apply primer to detailed areas and hard-to-reach places and then use a small foam roller to apply primer to all of the large, flat surfaces. You can use a paintbrush for the whole thing if you prefer, but using a roller saves a lot of time and often gives a smoother finish. Don’t be alarmed if the primer coat looks really splotchy and bad – that’s totally normal. Once you add paint, it will start to look much better. Since we are using an oil-based primer, you will need to clean your paintbrush using mineral spirits. You cannot clean oil-based products with water. If you get some on your skin, I have found that baby oil or an oil-based facial cleaner works well to help wash them off.
Painting the dresserFinally, it is time for the paint! As I mentioned before, you can really use any type of paint using this method. Plain latex paint will work just fine, as will chalk paints and other specialty furniture paints. If you want a bit more guidance on which paint to use, I have a whole post about the best paints for furniture. For this dresser, I used Dixie Belle chalk paint. I’ve used many brands of chalk paint, but this was my first time using Dixie Belle and I really liked it. It went on smoothly and covered well. I had a really hard time choosing a color for my dresser. I knew I wanted to use a light, bright color since it would be in a room that doesn’t get a lot of natural light. But I didn’t want to paint it white since it would be against a big white wall. I ended up making a custom color by mixing the Dixie Belle colors French Linen and Cotton. It’s a putty/greige color and is a great light, neutral color that still stands out against all the white. You can apply your paint the same way you did the primer. Use a paintbrush for edges and small details and a foam roller to paint the large, flat surfaces. You will probably need two coats of paint to get even coverage.
Sealing the dresserSealing your painted furniture is one of the most important things you can do to make sure your paint finish lasts. (I learned this lesson the hard way!) Furniture painted with latex paint and chalk paint always needs to be sealed. There are some other awesome furniture paints out there that claim they do not have to be sealed. And they don’t. However, they will last much longer with a good sealer on top. A good sealer or topcoat will protect your beautiful paint finish from scratches, chips, scuffs, and stains. Sealers also protect your paint finish from water and create a surface that is easy to clean. My favorite sealer to use on painted furniture is General Finishes High Performance Top Coat. It is easy to apply, holds up well, and works well over all types of paints and sealers. (Want to see more options? Check out my guide to the best and worst sealers for painted furniture.) I typically apply my sealer using a good, quality paintbrush. This time I decided to try something different. I used the Dixie Belle blue sponge applicator and I’m a big fan. The sealer went on incredibly smoothly with absolutely no brush marks. I will definitely be using this again in the future. (I don’t recommend a roller for applying sealers; they sometimes leave behind air bubbles and it is generally harder to get a smooth finish.)
Replacing the hardwareOnce the sealer is fully dry, you can gently add your drawer pulls and other hardware. You can also remove the painter’s tape from any hardware that couldn’t be removed. Be very careful removing the painter’s tape because it is easy to accidentally pull off some of the paint as well. If you have a stubborn piece of tape that seems sealed in place, carefully use a razor blade or other sharp surface to cut around the edge where the painter’s tape meets the painted surface before removing the tape. For my own dresser makeover, I chose to reuse the hardware it came with. I kind of liked the simple shape and of course, not needing to buy new hardware was a money-saver. I did give them a bit of an update though. I dry-brushed the hardware with DecoArt Metallics champagne gold paint. This is one of my favorite gold paints because it is very subtle and not too brassy. To apply the paint, I dipped a clean rag lightly into the paint and then wiped off any excess before lightly dabbing it onto the hardware. The original black still shows through but I think the touch of gold gives just the right amount of shine and style. Be extra gentle with your dresser for the first several weeks after you finish painting it. It typically takes paint 21-30 days to fully cure or harden. During those first few weeks, it is especially easy to accidentally scratch the paint finish, even after using a good sealer.
Painted Dresser RevealAnd here’s how my sweet little dresser looks now: I absolutely love how this painted dresser turned out. The simple, fresh paint really accentuates the classic lines and shape. And the color is the perfect non-white neutral. At first, I was planning to hang a mirror over the dresser, but when I tried it, the dresser/mirror combination was giving off really strong bedroom vibes. Not what I was going for. Instead, I hung this pretty painting I found at a yard sale and a brass picture light over it. I love this combo and I think it definitely helps the dresser look right at home in our family room.
More Furniture DIYsReady to see what my fellow Furniture Flippers are up to this month? Just click the links below to visit each furniture DIY.
How to Make a Headboard with Caning by Refresh Living
How to Whitewash Wood by Repurpose and Upcycle
How to Paint a Dresser by Lovely, Etc. (you are here)
I’d love for you to pin this post on Pinterest!Happy painting!
- Rag or paper towels
- Painter’s tape
- Wood filler
- 220 grit sandpaper
- Oi- based primer
- Blue sponge for applying sealer
- Foam roller and paint tray
- Remove the hardware and set it aside.
- Give your dresser a good cleaning with Krud Kutter PrePaint Cleaner.
- Make any necessary repairs to the dresser.
- Use wood filler to fill in any holes. Smooth with sandpaper.
- Prime the dresser with Zinsser Cover Stain oil-based primer using a paintbrush for small areas and a foam roller for large areas.
- Begin painting by using a paint brush for edges and small details, and a foam roller for large, flat surfaces.
- Allow paint to dry and add a second coat.
- Apply a sealer using a good, quality paintbrush, or with a sponge applicator.
- Once sealer is dry, add the drawer pulls and hardware.
As an Amazon Associate and member of other affiliate programs, I earn from qualifying purchases.
General Finishes High Performance Water Based Topcoat, 1 Quart, Satin
Scotch Painter's Tape 2093EL-24E ScotchBlue TRIM + BASEBOARDS Painter's Tape, 0.94-Inch x 60-Yard, 1 Roll, Width, Blue
DecoArt Ameri Deco MTLC Cham Americana Decor Metallics 8oz ChampagnGld, 1, Champagne Gold
Dixie Belle Paint Company Blue Sponge Applicator
Zinsser 03504 Cover Stain Interior/Exterior Oil Primer Sealer, 1-Quart, White
24PCS Sand Paper Variety Pack Sandpaper 12 Grits Assorted for Wood Metal Sanding, Wet Dry Sandpaper 120/150/180/240/320/400/600/800/1000/1500/2500/3000 Grit
Elmer's Products, Inc E848D12 Carpenter's Wood Filler, 1/2 Pint
KRUD KUTTER PC326 PC32 Prepaint Cleaner/TSP Substitute, 32-Ounce, Original Version