I’ve gotten quite a few questions recently about the GIANT subway art in our family room. I realized that I never explained how I made it even though it has shown up in lots of pictures around here.
I like to call this my wise old sayings sign. The words are a collection of old sayings that really resonate with me. It says:
“All that glitters is not gold. You catch more flies with honey than vinegar. A trouble shared is a trouble halved. Laughter is the best medicine. A grudge is a heavy thing to carry. Into every life a little rain must fall. Know thyself. Some things are better left unsaid. Temper justice with mercy. Two heads are better than one. Waste not, want not. Take life as it comes.”
This was actually the very first painted sign I ever made. (Go big or go home right?) I made it five years ago and have made many a sign since then and learned a LOT in the process.
Let’s just say if I was to remake this sign today, I could easily do it in half the time.
I’m going to share with you how I made it originally, but more importantly I’m going to share with you a much easier and quicker way to recreate it.
My original wise old sayings sign was painted on a piece of wood that I pulled off of an old dog pen that was in our yard when we bought our house. The board is about 8 feet long and 3 feet high. Because it had been outside for quite awhile, the wood had a great aged finish to it already – plus nail holes all around that really added character.
For everyone who doesn’t happen to have a dog pen in your yard (basically everyone!), you can use a piece of plywood from your local home improvement store. The largest size is usually 4’ by 8’. Your sign can be any size, but I happen to think a really huge sign is a great focal point. You can have them cut the plywood to any size you would like at the store – just make sure to measure your wall first to make sure it will fit!
Next up is painting the background – even though my board was awesomely weathered, it started out as a faded red. Not my color of choice. I painted my sign with several coats of Lincoln Cottage Black by Valspar.
Which brings us to the words which were by far the most intimidating and time consuming part for sure.
Originally, I used a set of chipboard letters to paint my words. I used a pencil to trace around each letter and then with a small paintbrush and some cream paint, I painstakingly filed in each letter.
Three. coats. each.
Yep, my back was aching for days.
To save you from similar torture, I propose a slightly different method. If I were to do this all over again, I would simply fill my letters in using a paint marker, rather than a paintbrush. Coloring in the lines is so much easier than trying to control a paintbrush. Not to mention, one coat will usually do the trick with maybe a few touch-ups. And yes, they do make white paint markers. Just be sure to go with the oil paint markers, rather than water-based. That way you can be sure it will stick.
Once you have colored in all of your letters, just sand them lightly. The sanding transforms them so they no longer look like they were colored with markers. (Check this sign out for more details on this).
And as far as tracing the chipboard letters, that actually worked just fine. But you could also use alphabet stencils to get your letter shapes. Or if you happen to own a Silhouette, this would be the perfect project for it.
One of my favorite things about this sign is the fact that the words reach all the way from one side to the other. To do this, I tried to plan ahead a bit. If it looked like I was going to have extra space, I spaced my words out a little more. If it looked like it was going to be tight, I moved them a little closer together. On the very last line, I had several wasted inches so I ended up adding my initials.
If you are super observant, you may have noticed I just replaced this humongous sign with my DIY family silhouette. It was time for a change, but you can bet this sign will be finding a new home in our house very soon.
Anyone up for making a gigantic sign of your own? If you were going to make one of your own, what would it say?